Audio Over IP
TERRA-AMP | IP Amplified Terminal
Features
Specifications
Applications
Models
Features
Amplified IP Terminal (15W x 2) Features
TERRA-AMP is an IP audio terminal which delivers 15 watts/channel into 8 ohm. Each device comes with 2 channels and 15W independent outputs with external power.
TERRA-AMP model features mic/line inputs that can be played locally as a source for network streaming. Playlist backups or prerecorded announcement are achieved via USB flash memory interface, which offers an ideal solution for commercial audio & also public address systems.
Specifications
TERRA-AMP Specifications
- 1 mic/line balanced input
- 2 balanced line outputs (1 stereo or 2 mono)
- 15W x 2 (8 ohm) amplifier outputs (6W x 2 by PoE)
- 1 stereo line input (3.5 mm mini-jack) for headphone
- Frequency response: 20 Hz ~ 20 kHz
- Maximum input/output level: 5 dBu
- Single STP CAT5/6 cable connectivity for audio and control
- PoE or 24 VDC power supply (if PoE is not available)
- Full duplex intercom with AEC (Acoustic Echo Cancellation) and NR (Noise Reduction)
- Web browser interface for device management and monitor
- SNMP (Simple Network Management Protocol) for device management on IP networks
- One USB 2.0 interface for recording, message and music files
- Power LED and Status LED indicators
- 3 contact inputs and 2 contact outputs
- RS232 or RS485 for 3rd party control
- Power consumption: 30W
- Weight: 1 lb (460g)
- Dimensions (D x H x W): 4.1″ x 1.3″ x 4.3″ (104 x 32 x 109 mm)
- Supported audio codec:
- SIP: G.711 ulaw, G.711 alaw, G.722, G.726-32, G.727-32, G.729, PCM16K
- SHOUTcast / icecast: MP3, AAC+
- Stream: G.711 ulaw, G.711 alaw, G.722, WAVE, MP3, PCM16K
- Record: G.711 ulaw, G.711 alaw, G.722, WAV, MP3
Applications
TERRA-AMP Applications
Synoptic Application
Models
TERRA-AMP Models
| TERRA-AMP | 3.5 mm stereo in x 1, mic/line x 1, stereo OUT x 1 or mono x 2, stereo line-OUT x 1 or mono x 2, input contact x 3, relay output contact x 2, RS232 x 1 |
| TERRA-AMP4 | 3.5 mm stereo in x 1, mic/line x 1, stereo OUT x 1 or mono x 2, stereo line-OUT x 1 or mono x 2, input contact x 3, relay output contact x 2, RS485 x 1 |